Industrial Waste in the Mirrored Zone
The community’s industries deal with their waste in three ways: they use it again in their own work, pass it to a neighbouring business that can use it, or send what no one can use to the district plant, where it is destroyed or made into new material. Nothing goes to a landfill. These industries are the metal shops, furniture and woodworking, the tile plant, plastics, textiles, printing, electronics and food processing, and the repair shops, remanufacturers and laundry that keep things in use. They all sit in the mirrored zone across the easement.
The goal is the same as for the homes, but the way of getting there is different. Each residential building treats its own waste on its own roof, so that it can look after itself as far as possible. An industrial business does not have to work that way. It can deal with its waste wherever that costs least: in its own plant, in a plant it shares with similar businesses, or by passing it to a neighbour that can use it. The one thing it may never do, whatever the cost, is let anything escape into the air, the water or the ground. The constitution already says the community may not release methane. In the industrial zone, that rule covers every emission: dust, fumes, solvent vapour, kiln gas and smells, as well as methane.
There is one limit. Goods sold to buyers outside the community leave the community’s hands when they are sold, and what happens to them after that is beyond its control. The rule that a product goes back to the business that supplied it does not follow them. The waste made while producing those goods, however, stays in the community’s system like any other.
Using waste again
Most industrial waste can be used by someone. A business that cuts metal sends its scrap back to the mill that supplied it. A furniture maker cuts its offcuts into smaller parts and sends its sawdust to compost. Much of its wood comes from the community’s own fruit and nut trees, cut when mature trees are cycled, and becomes specialty products. The tile plant grinds up its rejects, and old tile taken out of buildings, and makes new tile from them. Because the zone is planned from scratch, businesses whose waste is useful to each other can be placed next door to each other, so heat, water and by-products only have to travel a short way. The town of Kalundborg in Denmark has worked like this since the 1970s; here it is planned that way from the start.
Using waste again always comes before destroying it. Used solvents are distilled and reused, acids are cleaned and reused, metals are recovered from sludge, and used oil is refined again. Catalysts, filters and activated carbon go back to the companies that supplied them to be cleaned and reused. Only what none of these can use goes to the district plant. There it is destroyed completely or, if it is plastic, made into new plastic.
What each trade leaves behind
The metal trades, which make parts and build machinery, produce the most scrap. Offcuts, shavings and worn parts go back to the mill to be melted down. Cutting fluids are filtered and topped up instead of being thrown away. The sludge from plating and finishing has its metals taken out first, and used oil is refined again.
Furniture making and woodworking leave offcuts, sawdust and old finishes. An offcut is cut into a smaller part, and then a smaller one, until it is too small to use. Then it becomes wood chips for compost and biochar. The solvents in the finishes are distilled and used again.
The tile plant takes back its own rejects, its kiln dust and every tile removed from a building, and grinds them into new tile. The plastics makers, including those that make the film for the tile, grind their offcuts and rejects into new plastic. Plastic that is too worn for this goes to the district plant.
Textile makers leave fiber, which goes to the clothiers to be reused, and dye water, which is cleaned before it is mixed with any other water. Printers leave ink and cleaning solvents. The solvents are distilled and reused, and the leftover ink goes to the district plant. Electronics and robot makers leave etching acids and scrap circuit boards. The acids are cleaned and reused, and the metals are recovered. Pods, e-bikes and their batteries are rebuilt. When a battery is too weak to drive a pod, it is used to store power in a building, and only after that are its metals recovered.
Food processing leaves whey, bones, blood, trimmings and wash water. These are handled the same way as household food waste: animal feed where the law allows, bone meal and blood meal for the soil, and wash water sent to the building’s plant once the fat has been skimmed off. The repair shops, remanufacturers and laundry make waste too. Worn parts go back to the companies that made them, and the laundry reuses its water and heat.
The villages that make goods for outside buyers produce the same kinds of waste, and it is handled the same way. Only the finished goods leave.
Sharing plants and neighbours
Most of each trade’s waste goes straight back into making something, in its own plant, in a plant shared with similar businesses, or in a neighbour’s process. Only what is left over goes to the district plant.
Where a trade has only a little waste, the businesses in its village share one still, one acid plant or one metal-recovery line. Trades that can use each other’s waste, such as woodworking and composting, or plastics and the tile plant, are placed next to each other.
Nothing escapes
No industrial building has an open chimney. Dust from cutting, sanding, grinding and the kilns is drawn into hoods at each machine and caught in cloth filters. It then goes back to where it came from: tile dust into the tile mix, sawdust to compost, metal dust to the mill. Solvent fumes from finishing, printing and cleaning are kept inside closed booths and caught by carbon filters or condensers. The solvent is reused, and whatever cannot be recovered is broken down in the building’s own plant.
Gases from kilns and furnaces are washed in scrubbers, and the salts caught there join the community’s salt line. Welding and soldering fumes are drawn away at the workbench and filtered, and the used filters go back to the supplier so the metals can be recovered. Rooms that smell, such as food processing and composting, are kept at slightly lower air pressure so the smell cannot leak out, and their air is cleaned through biofilters. The carbon dioxide from every fuel cell and process is captured, as it is in the homes. It goes first to the greenhouses, then to the chemical businesses, and finally back into the gas field.
Every chimney and vent has a monitor that runs all the time. As with methane, the readings are checked and published. Any release above the published limit counts as a failure, and it must be stopped and fixed within the time the standard sets. A business cannot buy the right to release more, or make up for it somewhere else. This is the one rule in the zone where cost is never an excuse.
Water stays in the zone
Water used in industrial processes is kept separate from a building’s ordinary grey water until it has been cleaned, because each trade’s water carries something different. Cutting fluids, plating baths and dye baths are filtered and topped up instead of being drained. A bath is replaced only when filtering can no longer keep it usable.
Water that does leave a process is first cleaned of whatever that trade puts into it: metals are removed from plating water, dye from textile water, and fat from food wash water. Only then does it join the building’s water system, and the salty water left over from cleaning goes to the salt line. Small workshops, such as a village’s plating or dye shops, may share one treatment plant if that is cheaper.
No drain leaves the zone. Water that cannot be cleaned well enough to reuse is evaporated, and what is left behind goes to the district plant.
The district plant
Waste that no trade or neighbour can use leaves a business only in a sealed, labelled standard box. The box is recorded in the materials ledger when it is filled and again when its contents are recovered or destroyed, so every bit of hazardous waste can be traced.
At the district plant, leftovers such as ink, mixed sludge and dirty filters are destroyed in a supercritical water oxidation reactor, a larger version of the one on each residential building’s roof. Its carbon dioxide is captured and its salt joins the salt line. Worn plastic is turned into gas and made into new plastic. Any gas left over is split into hydrogen, used by the chemical businesses, and carbon, used on the farms.
The drilling lot
The fifteen-acre drilling lot holds the rig, the wellheads, lined ponds, a materials yard, a tank farm and a processing plant. It makes the heaviest waste in the zone and follows the same rules. Drilling mud is cleaned and used again at the next well. Rock cuttings are tested and either go back into the ground as fill or, if clean enough, into building materials. Water that comes up with the gas is cleaned and pumped back underground, never released. Methane follows the rule already in the constitution, and the community’s carbon dioxide goes back to the gas field through the same line that brings the gas in.
Who is responsible
Each business is responsible for its own waste, from the machine that makes it to the shared plant or neighbour that takes it. It pays for treating that waste, either in its own plant or as a fee to a shared plant or the district plant, and it can sell whatever it recovers. Because cost comes first in industry, a business can choose whichever option is cheapest, as long as it meets the standard.
Bureau 22 decides the order in which waste must be recovered, sets the standards for recovered material and keeps the materials ledger. Bureau 23 runs the plants and sets the limit for every emission and drain. Bureau 18 checks and publishes the monitor readings, as it already does for methane, and Bureau 13 pays for the research the zone still needs.
What is proven, and what is not
Almost every step described here is already used by businesses somewhere: cloth filters, scrubbers, carbon filters and biofilters; distilling solvents, cleaning acids and re-refining oil; recovering metal from plating sludge; and monitoring chimneys around the clock. Supercritical water oxidation is used in large plants, and the businesses in Kalundborg have shared heat, water and by-products for fifty years.
What no one has done yet is all of it in one place. No industrial area has yet released no wastewater and no emissions of any kind, with every business measured and the results published. This zone would be the first.
What remains to be settled
Several things still need to be worked out: how much of each kind of waste each trade will produce, which trades will share a plant and in which villages, which businesses should be placed next to each other, where the district plant will go and how big it will be, and what the published limit for each emission will be. It is also still open what happens to a business’s waste if the business fails or moves away.
Related pages
The Recycling Architecture of the Community · Waste & the Reactor · Materials Continuity · Water Reclamation · Carbon Return
Constitution, §7.4, with NV Build.